Sensoray 311 Manual do Utilizador descarregar pdf (Página 9)

Slot and interrupt selection

JP3 (also marked A and B) is used to select the PC104+ module slot number. Refer to the table

below for the correct jumper setting.

Module Slot # JP3

Jumper B inserted Jumper A inserted

0 Yes Yes

1 Yes No

2 No Yes

3 No No

Jumpers JP5-JP8 are used to select an interrupt line used by the frame grabber. Refer to the

table below for the jumper settings.

Interrupt line used Jumper inserted

INTA JP5

INTB JP6

INTC JP7

INTD JP8

Note. Model 311 frame grabber does not require an interrupt line use for image capture. If,

however, it is preferred to use interrupts, one has to make sure that the interrupt line selected by

the jumpers on the 311 is not used by other hardware.

1 2 3 4 5 6 7 8 9

Sem comentários

Sensoray 311 Manual do Utilizador Página 9