Sensoray 512 DOS Manual do Utilizador descarregar pdf (Página 10)

If the environment variable is to be used, the statement below could be added to your AUTOEXEC.BAT

file.

SET X12PATH=<driver files directory>.

For example,

SET X12PATH=C:\X12DOS

X12TSR.EXE is loaded by typing X12TSR at the DOS prompt or by adding it to the AUTOEXEC.BAT file

for automatic loading at boot time. A number of command line switches are provided to ensure proper

initialization of the driver. The command line switches are described below.

C:\path>X12TSR [HELP][-2][-Axxx][-Sx][-Cx][-RM][-NI] [[-Axxx][-Sx][-Cx]]

Where,

HELP Displays a list of the switches. Does not load TSR.

-2 Indicates that there are two 512s in your system. Do not use if there is only one 512.

-Axxx Sets 512 base address (hex, default CC0 for first 512, DC0 for second).

-Sx Sets video source input to SVideo input x (1-2).

-Cx Sets video source input to composite input x (1-4, default input 1).

-RM Removes 512 driver from memory, if possible.

-NI 'No-install' initialized 512 video without installing driver.

NOTE: All parameters between [ ] are optional. Default values will be provided if not used.

NOTE: If there are two 512s in system, the -A, -S, and -C switches can

be repeated on the command line for the second 512.

Example(1),

SET X12PATH =C:\X12DOS

C:\X12DOS\X12TSR

Loads X12TSR.EXE for one 512 and uses the defaults (i.e. the video input is composite video 1, base

address of 512 is CC0 (hex),

Example(2),

SET X12PATH =C:\X12DOS

C:\X12DOS\X12TSR –S1 –AF00

Loads X12TSR.EXE for one 512 and sets the video input to SVideo input 1 and the base address of 512

to F00 (hex).

Example(3),

SET X12PATH =C:\X12DOS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sem comentários

Sensoray 512 DOS Manual do Utilizador Página 10