Sensoray 2600 Manual do Utilizador descarregar pdf (Página 53)

2600 Family Instruction Manual

Chapter 8 : Model 2612 Strain Gauge/RTD Module

Command (Adrs),(Data)

Response none

Notes This function is used by the middleware to store

calibration data for the module. Refer to the

distribution media for details.

Due to the lengthy time required to write a byte to

the EEPROM, this action should be invoked only

once per command packet.

8.8 Specifications

Parameter Function

Adrs Memory address that is to be written to.

Data Byte value that is to be stored.

Table 25: Model 2612 Specifications

Analog Inputs Resolution 24 bits

Input channels 4

Conversion rate 6.875 to 3500 samples/second for each channel.

Input range ±1/2 of reference.

Input impedance 110 kOhm, minimum, measured from either sensor input to reference voltage.

Power Outputs Output channels 4

Output power 1.25V, 2V, 3V or 5V, ±10%@ 1 to 25 mA for each channel.

Mating Connectors

(*) = included with module

IOM port (qty 1) RJ-45 plug, AMP 554169 or equivalent

Analog inputs (qty 4) RJ-45 plug, AMP 554169 or equivalent

Analog inputs (qty 4) (*)Pluggable TB, 8-pin, RIA 31166110 or equivalent

Temperature Operating range 0 to 70°C

Power Input power +24V ±5% @ 60mA.

Dimensions Outer dimensions 5.0H x 5.0W x 1.8D inches, including DIN mounting frame. Depth is specified with

respect to surface of DIN rail support panel; additional clearance required for field wiring.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Sem comentários

Sensoray 2600 Manual do Utilizador Página 53